compact-low-profile-load-cell-dsc_0015

Compact Low Profile Load Cell

Compact Low Profile load cells are fully stainless steel, hermetically sealed load cells with a multi-beam internal structure, and fully integrated electronics to provide high level analog or digital outputs. This type of load cell is easy to use for measuring tension or compression loads from 200N (50lb) to 5kN (1000 lb), and is capable of rejecting side forces that would otherwise affect accuracy. This type also offers the user the ability to set the gain and offset (span and zero) electronically, to provide maximum flexibility for the user application.

Model number: CLP

For more information or to request additional specification, please contact us.

Specifications
Parameter Range Notes
Capacity 200, 500, 1k, 2k, 5k N, 50, 100, 200, 500 & 1000 lb  
Rated Output (RO) 1-9V or 4-20mA or CAN or RS485 1mV/V Select when ordering
Non-linearity <= 0.1% RO  
Hysteresis <= 0.1% RO  
Repeatability <= 0.03% RO  
Zero balance Factory setting ±0.1%, Range ±50% RO Adjustable via electronic interface. See user manual for details.
Span Factory setting ±0.1%, Range ±50% RO Adjustable via electronic interface. See user manual for details.
Temp Shift Zero ±0.005% RO/°C  
Temp Shift Span ±0.005% RO/°C  
Compensated Temp Range -10 °C TO +50 °C  
Operating Temp Range -40 °C TO +85 °C  
IP Rating IP68 Fully SS Construction laser welded
Bridge resistance 700 Ohms Nominal  
Excitation 12-24 Vdc  
Safe overload 150% of F.S.  
Material Stainless Steel  
Rated load 200, 500, 1000, 2000, 5000N  
Proof load 150% of rated load No effect on calibration
Ultimate load 200% of rated load No structural failure (deformation only)
Deflection <0.05 mm Depends on rated load
Natural frequency > 1000 Hz Depends on rated load
Creep Over 20 Minutes <= 0.03% RO  
Power Supply 12 to 24 VDC, <40mA  
Insulation resistance => 5 GOhm @ 50 VDC  
Protection glass IP68 Fully stainless steel construction, laser welded
Weight 750 g  
Connector Analog O/P: 8-pin M12 male, hermetic; Digital O/P: 5-pin M12 male, hermetic  
Technical Bulletins