custom-torque-designs-motor-flange-c-face-mount-reaction-torque-sensor

Custom Torque Designs Motor Flange C Face Mount Reaction Torque Sensor

This unique style torque sensor is designed to measure the reaction forces exerted on the motor housing that feature a C-face mount.  HITEC’s model 01291 is directly mounted to the motor’s flange face as the main interface between it and the torque load.  It can be used with variable displacement motors, fluid meters, linear actuators, and other drive motors to measure the output torque, in real-time and at the source.  The use of this sensor greatly reduces the potential of electrical noise due to bearings or slip-ring brushes, and allows for more extreme environmental exposures, such as at sea or at remote field sites.

Model number: 01291

For more information or to request additional specification, please contact us.

    Specifications
    Capacity 500 in-lbs.  
    Overload capacity 150% of F.S.  
    Output at F.S. 2.0 mV/V nominal  
    Non-linearity 0.10% of F.S.  
    Hysteresis 0.10% of F.S.  
    Zero balance 1.00% of F.S.  
    Compensated temperature 70 to 170°F  
    Useable temperature -65 to +250°F  
    Temperature effect on zero 0.002% of F.S./°F  
    Temperature effect on span 0.002% of Rdg./°F  
    Bridge resistance 350 Ohms  
    Excitation voltage, maximum 20 Vdc