Reaction Torque Sensors – Socket Sensors [01190]

These strain gage-based sensors are designed for static and limited rotation torque measurement applications, such as drive socket systems, calibration of hand and click wrenches, and checking applied torque values.  They are available in ten wide ranging capacities. All use a full, four-arm Wheatstone Bridge circuit and have an elastomer coating to protect against mechanical damage. SDI’s Auto-ID connector is optional.

OPTIONAL DISPLAY UNITS INCLUDE:

  • PMAC 3000, Model 90424
  • PTI, peak track instrument, Model 90323

OPTIONAL IN-LINE SIGNAL CONDITIONING:

  • +/-5V,+/-10V or 4-20mA outputs

Specifications

SPECIFICATIONS

Capacities  25 in.lb. to 7,000 ft.lb. (See chart)
Overload capacity 150% of F.S.
Output at F.S See chart
Non-linearity 0.10% of F.S.
Hysteresis 0.10% of F.S.
Zero balance 1.00% of F.S.
Compensated temperature 70 to 170°F
Useable temperature -65 to +250°F
Temperature effect on zero 0.002% of F.S./°F
Temperature effect on span 0.002% of Rdg./°F
Bridge resistance 1000 Ohms
Excitation voltage, maximum  20 Vdc
Material Alloy Steel