Reaction Torque Sensors – Keyed Shaft [01090]

The torque output of motors and absorbers can often be sensed by measuring the reaction torque required to prevent the housing from rotating. They are also ideal for limited rotation applications such as the measurement of torque required to turn a valve, fastener or actuator shaft.

Options:  Consult our sales department for different end configurations, change model number from 01090 to:


Capacity  100 to 10,000 in-lbs (See chart)
Overload capacity 150% of F.S.
Output at F.S 2.0 mV/V nominal
Non-linearity 0.10% of F.S.
Hysteresis 0.10% of F.S.
Zero balance 1.00% of F.S.
Compensated temperature 70 to 170°F
Useable temperature -65 to +250°F
Temperature effect on zero 0.002% of F.S./°F
Temperature effect on span 0.002% of Rdg./°F
Bridge resistance 350 Ohms
Excitation voltage, maximum 20 Vdc
Material  Alloy Steel