Torque Verification [90229]

SDI’s 90229 is designed for calibrating tools used to apply torque including electric and pneumatic power tools, torque sensors, hand and click wrenches. The strain gage based reaction torque sensors in the bench-mount housing remain stationary while torque is applied. The housing dis-assembles by removing two snap pins, allowing the user to easily change socket sizes and capacities.

 

SYSTEM INCLUDES:

  • The PMAC 2000 (Model 90222), a portable auditing instrument with peak reading and storage capability
  • Choice of two 01190 socket extension torque sensors, with Auto-ID for easy interchangeability
  • Bench mounted housing

 

OPTIONAL FEATURES:

  • Replace PMAC w/ PTI, Model 90323
  • Replace PMAC w/ USB, Model 90386
  • Bench mounted housing only, Model 90221

Specifications

SPECIFICATIONS – Model 90222 PMAC 2000
Sampling rates

Track 4 Hz
Peak 5 kHz
Scope functions selectable up to 10 kHz
Frequency response (3 dB) at 1000 Hz
Accuracy max error = 0.05% of F.S.

Sensor interface

Max input at F.S. 4.5 mV/V
Polarity Bipolar
Bridge excitation 7 V supplied
Minimum bridge impedance 120
Data output S-232 port ASCII, 9600 baud, 8-N-1

Power

AC (adapter supplied) 115 V ac (220 optional)
Batteries 9.6 V internal/rechargeable
Useable temperature -65 to +250°F
Bridge resistance 1000 Ohms
Excitation voltage, maximum 20 V dc

SPECIFICATIONS – Model 01190 (select any two)

1/4” drive 50 in-lbs.
1/4” drive 125 in-lbs.
3/8” drive 200 in-lbs.
3/8” drive 50 ft-lbs.
1/2” drive 125 ft-lbs.
1/2” drive 200 ft-lbs.
Overload capacity 150% of F.S.
Output at F.S 2.0 mV/V nominal
Non-linearity 0.10% of F.S.
Hysteresis 0.10% of F.S.
Zero balance 1.00% of F.S.
Useable temperature -65 to +250°F
Bridge resistance 1000 Ohms
Excitation voltage, maximum 20 V dc